.jpg)
.jpg)
.jpg)
---副本.png)
---副本.png)
USB PD (power delivery) charging protocol is a power transmission protocol published by usb-if organization. It can increase the type-C interface with the default maximum power of 5V / 2A to 100W. and can f... Read More
What is USB PD3.0 (Power Delivery 3.0)? USB PD3.0 (Power Delivery 3.0) is a power supply standard based on the USB Type-C interface. The maximum power supply can reach 100W(watts). The connectors at both ends o... Read More
What are the differences between USB PD3.1 and USB PD2.0 PD3.0? Recently, the USB-IF Association released the latest USB PD3.1 fast charging standard, which increases the charging power from the 100W to 240W and suppo... Read More
USB-C Power Delivery--What makes a USB-C cable fast charging? Before the Type-C interface appeared, the USB cable was only allowed to provide 2.5W of power, while the USB Type-C cable allowed the maximum power to be... Read More
AWG (American wire gauge) American wire gauge is a standard to distinguish the diameter of the wire, also known as Brown & Sharpe wire gauge. This standardized wire gauge system has been in use in the U... Read More
AWG (American wire gauge) American wire gauge is a standard to distinguish the diameter of the wire, also known as Brown & Sharpe wire gauge. This standardized wire gauge system has been in use ... Read More
We are often confused about the names of power cord connectors. From the Name list of power cord connectors below, you can get their authoritative IEC number (IEC 60320-1) Femal... Read More
What is the difference between RJ9, RJ10, RJ11, RJ12, RJ14, RJ22, RJ25, RJ45, RJ48? A registered jack (RJ) is a standardized telecommunication network interface for connecting voice and data equipment to a service pro... Read More
Copyright 2019 All Right Reserved.
